TENSION METER

Electronic or digital tension meter for applications in textile and wire industry, with various helpful functions for detailed data recording and analyse – Professional Instrument.

Versatile applicable hand-held unit.

12 Tension ranges available from 1 – 200 cN up to 0.6 – 60 daN.

Tension Meter DTX

Special Features

Additional functions in comparison to basic instrument DTS

 

  • Memory for 60.000 readings
  • USB interface
  • Tension meter DTX with 5 different memory modes:
Mode S: statistics only
Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurement (e.g. short time spooling)
Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
Mode F: fast, continuous logging over a user set time and different series of measurement (1000 Hz)
Mode D: storage of single readings and statistic

 

  • 9 Material memory locations for customer made calibrations
  • Software Tension Inspect 3 for displaying real-time readings on a PC and to store them into a file
  • Wi-Fi modul for wireless communication with a PC (optional)

Standard Features

  • Everything in operator’s view:
    – the guide rollers
    – the measured material
    – the readings
  • Filament guide and roller shifting mechanism ensure easy acquisition of the running material
  • Ball-bearing mounted, V-grooved guide rollers
  • Rubberized handle provides a secure hold in the operators‘ hand
  • Tension meter DTX with rugged aluminium housing
  • LiPo Accumulator (approx. 40 hours continuous operation) with AC adapter
  • CE certified, interference resistant against static electrifications
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Tension Meter DTX Technical Spesification

Calibration: According SCHMIDT factory procedure
Accuracy: For PA from 5 % up to 100 % FS*:
± 0.5 % FS* ± 1 digit
remaining tension range and other calibration materials:
±3 % full scale and ±1 digit
Memory for material curves: 2 for SCHMIDT calibration plus 9 for customized calibrations
Measuring units: Force (switchable): cN, daN, g, kg, N, lb
Thickness (switchable): mm, inch
Overrange: Approx. 10 % FS*, full scale, without accuracy guarantee
Overload protection: 100 % full scale
Measuring principle: Strain gauge bridge
Signal processing: Digital, 16 bit A/D converter
Measuring frequency: Max. 1 kHz (1000 measurings/sec.), intern 8 kHz
Measuring roller deflection: Max. 0.2 mm
Display: Graph LCD
3 different displays: Numeric,
Numeric with graph (time-tension)
X-Y-diagram
Display update rate: Approx. 2 times per second
Memory: MIN, MAX, PEAK, AVG and LAST
Output signal: USB
Memory: 60.000 values split up to 255 measuring positions
Memory modes: 5 memory modes with statistical evaluation
Damping: Adjustable electronic damping (averaging)
Cal. Adjustment: ± 10 steps in 1 % increment
Thickness compensation: Max. 2.5 mm (not available for all models)
Auto power off: Approx. 3 minutes of non-use
Temperature coefficient: Gain: less than ± 0.01 % FS* /°C
Zero point: Less than ± 0.03 % FS* /°C
Temperature range: 10 – 45 °C
Air humidity: 85 % RH, max.
Power supply: LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h,
USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material: Die-cast aluminium
Weight, net (gross): Up to DTX-50K approx. 875 g / 1550 g
DTX-60K-V1 approx. 1040 g / 2700 g

Specifications subject to change without notice!

Hand held Electronic Tension Meter

ZE Series
  • 4 Tension ranges available:
    from 0.5 – 50 cN
    up to 1 – 500 cN
  • Application for fibres, threads and fine wires
  • Cost-efficient tension meter for low tensions
PT Series
  • Tension range available:
    0.5 – 100 cN
  • Application: Textile industry, especially circular knitting machine
  • Pocket tension meter for low tension
ET Series
  • 3 Tension ranges available
    from 0.3 – 100 cN
    up to 2.0 – 500 cN
  • Application: textile industry
  • For hard to reach and limited access space applications
MST Series
  • 3 Tension ranges available:
    from 1 – 500 cN
    up to 1 – 2000 cN
  • Application: for sewing machines
  • With motorized take-up fixture
KXE Series
  • 2 Tension ranges available:
    from 0.50 – 20.00 daN
    up to 0.5 – 50.0 daN
  • Application: textile industry – warp tension
CTM Series
  • 2 Tension ranges available:
    up to 10 kN
    up to 45 kN
  • Application: tension meter for pretensioned non running ropes up to 25.4 mm Ø (1 inch)

Hand held Mechanical Tension Meter

Z Series
  • 10 tension ranges available:
    from 1 – 5 cN
    up to 20 – 300 cN
  • Application: for low tensions of fibres, threads and fine wires
  • Economical measuring device
  • 2 different designs
MKM Series
  • 3 tension ranges available:
    from 10 – 50 cN
    up to 50 – 400 cN
  • Application: textile – for adjusting yarn tension devices
  • Battery operated
DX Series
  • 12 tension ranges available:
    from 10 – 50 cN
    up to 5 – 20 daN
  • Application: for versatile use in various sectors of industry
  • Different guide rollers depending on application
  • 11 different designs
TEN Series
  • 11 tension ranges available:
    from 0.5 – 3 cN
    up to 50 – 170 cN
  • Application: for low fibre and thread tensions
DN Series
  • 16 tension ranges available:
    from 20 – 120 cN
    up to 40 – 400 daN
  • Application: for versatile use in textil, fibre and wire industry
  • Rugged design for high tensions
FT Series
  • Tension range available:
    6 – 50 N/cm
  • Application: Tension of synthetic and steel meshes

Pin It on Pinterest

Share This