Tachometers
Accurate tachometer for contact and non-contact measuring of speed, length and revolution. High quality tachometers for professional use.
SCHMIDT is represented in more than 40 countries around the world. Represented by exclusive agents in many countries, including PT. Kawan Era Baru for Indonesia market.
SCHMIDT measuring instruments are used in production as well as in laboratory for checking and measuring.
Tachometers
A hand held tachometer is a measuring device for determining the speed of motors or shafts, as well as for measuring the speed and length of moving surfaces such as belts and conveyor belts.
A distinction is made between a contact and a non-contact tachometer. In addition, some laser portable tachometer can be equipped with an adapter for contact measurements.
The devices are equipped with an energy-saving LCD, a highly visible LED as well as OLED or a simple analog display, depending on the type.
Electronic models have a variety of adjustable units to measure revolutions per minute, number of revolutions, length and speed. In addition, there are hand held tachometers with USB interface and optional software for displaying and analyzing the measured values on the PC.
DT Series
- Tachometer for contact and non-contact measurement
- Rugged model
- Housing: Aluminium.
HTM Series
- Mechanical tachometer for contact measurement
- small, rugged model
- Housing: plastic
PH Series
- Tachometer for contact and non-contact measurement
- Small, compact model
- Housing: Plastic
SCHMIDT Tachometers DT Series
Model DT-105A & 107A
Standard Feature:
- Measures revolutions,
surface speed and length - Easy to read LCD display
- Easy to use
- Built-in memory for LAST, MIN, MAX and 10 extra readings for recall in display
- Rugged aluminium housing
- 16 User selectable engineering units.
Model DT-105A and DT-107A is also available with 12 inch grooved wheel
(groove 24 mm) to determine wire speed and length of ropes, tapes etc. Code 12C e.g. DT-107A-12C
DT-105A & DT-107A Specification
| Measuring ranges: (floating decimal point) |
|
| Accuracy: |
Speed and Length: ± 0.4 % of reading ± 1 digit |
| Measuring units: |
|
| Display: |
|
| Auto power off: |
|
| Batteries: |
2x 1.5 V Type AA
|
| Memory system: | 13 readings (incl. LAST + MIN + MAX) are stored and retained for 5 min |
| Temperature range: | 5 – 45 ºC |
| Air humidity: | 85 % RH, max. |
| Housing material: | Die-cast aluminium |
| Dimensions: | 180 x 60 x 47 mm (L x W x H) |
| Weight, net (gross): | approx. 350 g (800 g) |
Model DT-205L & 207L
Electronic hand-held tachometers Contact and non-contact type
- Without Adapter (with laser beam): Non contact measuremet of revolutions
- With additional Adapter: Contact measurement of revolutions, surface speed and length
The screw-in adapter makes it quick and easy to convert from contact to non-contact operation.
Standard features:
- Easy to read LCD display
- Measuring distance up to 2 m
- Built-in memory for LAST, MIN, MAX and 10 extra readings for recall in display
- Rugged aluminium housing
DT-205L & DT-207L Specification
| Measuring ranges: (floating decimal point) |
|
| Accuracy: |
|
| Measuring units: |
|
| Laser, class 2: | Output < 1 mW, wavelength 670 nm, max. measuring distance 2 m |
| Display: |
|
| Auto power off: |
|
| Batteries: |
2x 1.5 V Type AA
|
| Memory system: | 13 readings (incl. LAST + MIN + MAX) are stored and retained for 5 min |
| Temperature range: | 5 – 45 ºC |
| Air humidity: | 85 % RH, max. |
| Housing material: | Die-cast aluminium |
| Dimensions: | 167 x 60 x 47 mm (L x W x H) |
| Weight, net (gross): | approx. 365 g (950 g) |
Feel free to discuss your Tachometer purchase plan with us
SCHMIDT Tachometers HTM Series
Mechanical hand-held tachometer
for contact measurement of revolution of engines or shafts as well as surface speed e.g. belts and conveyer belts.
High quality and efficient Hand-held model with analog display and 3 selectable resolutions.
Special Features
- Hand-held tachometer HTM for contact measuring of revolutions and line speeds
- For exact measurements of
- revolutions per minute
- speed in m/min
- Large (70 mm Ø), easy to read scale with 2 separate colored scales for readings in RPM (black) and surface speed (red)
- 3 different resolutions are selectable
- Memory button holds pointer in the last position until reset
- Tachometer HTM requires no batteries; therefore it can be used in many industries.
Standard Features
- Easy to use
- Compact, Rugged plastic housing
Available Models
Model
- HTM-100M
- HTM-500M
Measuring Range
- 10 – 10000 rpm, 1 – 1000 m/min
- 30 – 50000 rpm, 3 – 5000 m/min
| Measuring Range: | Revolution HTM-100M: x1 = 10 – 100, x10 = 100 – 1000, x100 = 1000 – 10000 rpm Speed HTM-100M: x1 = 1 – 10, x10 = 10 – 100, x100 = 100 – 1000 m/min |
HTM-500M: x1 = 30 – 500, x10 = 300 – 5000, x100 = 3000 – 50000 rpm HTM-500M: x1 = 3 – 50, x10 = 30 – 500, x100 = 300 – 5000 m/min |
| Accuracy: | ± 0.5 % full Scale | |
| Measuring unit: | Revolution: rpm Speed: m/min |
|
| Temperature range: | 0 – 40° C | |
| Housing: | Plastic | |
| Dimensions: | 155 x 85 x 55 mm (LxWxH) | |
| Weight, net (gross): |
Approx. 300 g (approx. 700 g) |
Specifications subject to change without notice!
- Rubber Tip
- Funnel
- Extension
- Rubber Measuring Wheel
Tachometer HTM with carrying case, 1 rubber tip, 1 funnel, 1 rubber measuring wheel (10 cm circumference), 1 extension and operating instructions.
SCHMIDT Tachometers PH Series
Electronic hand-held tachometers Contact and non-contact type
Standard Features:
- Easy to read LCD display
- Built-in memory for Max, Min, Average, Last and 10 seperate
readings for recall in display - Compact, rugged plastic housing
- 10 user selectable measuring units.
Model PH-100 A
Contact type: Measures revolutions, surface speed and length.
Model PH-200 LC
Combined instrument:
- Non-Contact mode uses laser beam and reflective tape for measuring rpm
- Contact type mode uses screwed-in adapter for measuring
rpm, surface speed and length
Model PH-200 L
Non-Contact type: Measures revolutions with laser beam
| Specifications | Model PH-100 A | Model PH-200 L | Model PH-100 A |
| Measuring ranges: (floating decimal point) |
Revolutions (non contact):
|
|
|
| Accuracy: |
Speed and Length: ± 0.4 % of reading ± 1 digit |
Speed and Length: ± 0.4 % of reading ± 1 digit |
|
| Measuring units: |
|
|
|
| Memory system: | 14 readings (incl. Last + Middle + MIN + MAX) are stored and retained for 5 min | 14 readings (incl. Last + Middle + MIN + MAX) are stored and retained for 5 min | 14 readings (incl. Last + Middle + MIN + MAX) are stored and retained for 5 min |
| Auto power off: | after 5 min of non-use | ||
| Batteries: | 2x 1.5 V Type AA, approx 50 h cotninuous use | approx. 35 h continuous use | approx. 35 h continuous use |
| Memory system: | 13 readings (incl. LAST + MIN + MAX) are stored and retained for 5 min | ||
| Laser, class 2: | Output < 1 mW, wavelength 670 nm, max. measuring distance 2 m | Output < 1 mW, wavelength 670 nm, max. measuring distance 2 m | |
| Batteries: | 3x 1.5 V Type AA approx. 50 h | approx. 35 h continuous use | approx. 35 h continuous use |
| Display: | 5 digit LCD 12 mm high | 5 digit LCD 12 mm high | 5 digit LCD 12 mm high |
| Auto power off: | after 5 min of non-use | after 5 min of non-use | after 5 min of non-use |
| Temperature range: | 5 – 45 ºC | 5 – 45 ºC | 5 – 45 ºC |
| Air humidity: | 85 % RH, max. | 85 % RH, max. | 85 % RH, max. |
| Housing material: | Plastic (ABS) | Plastic (ABS) | Plastic (ABS) |
| Dimensions: | 123 x 64 x 32 mm (L x W x H) | 150 x 64 x 32 mm (L x W x H) | 116 x 64 x 32 mm (L x W x H) |
| Weight, net (gross): | approx. 180 g (400 g) | approx. 230 g (450 g) | approx. 170 g (390 g) |
Delivery includes:
- Tachometer in carrying case with
- 3 Batteries,
- Certificate of compliance with order,
- Instruction manual
Special accessories:
- 1 rubber tip (A), 1 funnel (B), 1 rubber measuring wheel (F) with 6 inch circumference
- 1 Adapter (LC), 35 reflective tapes,
1 rubber tip (A), 1 funnel (B), 1 rubber measuring wheel (F) - 35 self-adhesive reflective tapes
- Grooved measuring wheel (G) with 6 inch circumference for measuring yarn and wire speeds, calibration certificate
- Grooved measuring wheel (G) with 6 inch circumference for measuring yarn and wire speeds, calibration certificate
- Set with 140 self-adhesive reflective tapes, calibration certificate.