Speed and Length Meter

Schmidt Control Instruments

Speed and Length meter for contact and non-contact measurements of yarn and cables, as well as measuring revolutions. Compact handy devices.

Available Models: 

Contact Our Sales Team
SCHMIDT Speed and Length Meter

Speed and Length Meter for Cables

Speed and Length Meter DT-105A-12C

Speed and Length Meter DT-105A-12C

  • Application: Speed and length meter for elevator cables and more
  • Design: contact measuring
  • Measuring range:
    0.1 – 25000 rpm
  • Display: LCD, electricity saving
Features

Special Features

  • Speed and length meter DT-105A-12C for contact measuring of rope speed, length and revolutions;
    the measurement is carried out, as long as the measuring key is pressed

    Contact measurement with speed and length meter

    Contact measurement of revolutions, cable speed and length.

  • Speed and length meter for exact measurements of revolutions per minute, total revolutions, length and velocity with different metric and English units
  • 16 user selectable measuring units: (rpm; rev; m/min; m/h; ft/min; ft/h; yd/min; yd/h; in/min; in/h; mil/h; cm; m; in; ft; yd)
  • Large, electricity saving display
  • Tachometer with automatic and manual memory (MAX, MIN, mean, last and 10 separate readings) for recall in display
  • Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features

  • Easy to use speed and length meter
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
Specification
Measuring range:
(floating decimal point)
 Revolution: 0.1 – 25000 rpm; 6 – 9999.9 rph
Speed: z. B. 0.02 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min;
0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min; 1.0 – 9999 yd/h;
0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft;
0.005 – 9999.9 yd
Accuracy: Revolution: 0- 999.9 min-1 (±0.1 rpm) ±1 Digit
1000 – 9999.9 rpm (±1 rpm) ±1 Digit
10000 – 25000 rpm (±0.01 % of reading) ±1 Digit
Speed and length: ±0.4 % of reading ±1 Digit
Measuring units: Revolution: rpm; rph;
Total revolutions (counter): rev
Speed: m/min; m/h; ft/min; ft/h; yd/min; yd/h; inch/min; in/h; mil/h
Length: cm; m; in; ft; yd
Memory: 13 readings (incl. MIN + MAX + last value) for 5 min after last use
Resolution: Length: 0.00508 m/impulse
revolution: 60 impulse/revolution
Display: 5 digit, LCD 12 mm
Display update: 1 s
Over range indicator: Display is flashing
Auto power off: After 5 min of non-use
Power Supply: 2 x 1.5 V type AA, approx. 65 h continuous use
Low battery indicator: ”LO BAT” flashes in the display
Temperature range: 5 – 45 °C
Air humidity: 85 % RH, max.
Housing material: Die-cast aluminium
Tripod fixing: 1/4-20 UNC thread
Dimensions: 183 x 60 x 46 mm (LxWxH)
Weight, net (gross): Approx. 350 g (approx. 800 g)

Specifications subject to change without notice.

Delivery Includes
Geschwindigkeits- und Längenmesser DT-105A-C12Speed and length meter DT-105A-12C with batteries, carrying case, 2 rubber tips, 1 funnel, 1 measuring wheel (12 inch circumference), 1 extension 75 mm, Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in German and English
Speed and Length Meter DT-107A-12C

Speed and Length Meter DT-107A-12C

  • Application: Speed and Length Meter for elevator cables and more
  • Design: Contact measuring
  • Measuring range:
    0.1 – 25000 rpm
  • Display: LED, easy to read.
Features

Special Features

  • Speed and length meter DT-107A-12C for contact measuring of wire speed, length  and revolutions;
    the measurement is carried out, as long as the measuring key is pressed

     

    Contact measurement with speed and length meter

    Contact measurement of revolutions, cable speed and length

  • Speed and length meter for exact measurement of revolutions per minute, total revolutions, length and velocity with different metric and English units
  • 16 user selectable measuring units (min-1; rev; m/min; m/h; ft/min; ft/h; yd/min; yd/h; in/min; in/h; mil/h; cm; m; in; ft; yd)
  • Large, red, easy to read LED display, recommended at adverse lighting conditions
  • Speed and length meter DT-107A-12C with automatic and manual memory (MAX, MIN, mean, last and 10 separate readings) for recall in display
  • Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Standard Features

  • Easy to use speed and length meter
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
Specification
Measuring range:
(floating decimal point)		 Revolution: 0.1 – 25000 min-1; 6 – 9999.9 rph
Speed: e . g. 0.02 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min; 0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min; 1.0 – 9999 yd/h; 0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft; 0.005 – 9999.9 yd
Accuracy: Accuracy: 0 – 999.9 rpm (±0.1 rpm) ±1 digit
1000 – 9999.9 min-1 (±1 rpm) ±1 digit
10000 – 25000 min-1 (±0.01 % of readings ±1 digit
Speed and length: ±0.4 % of readings ±1 digit
Measuring units: Revolution: rpm; rph
Total revolutions (counter): rev
Speed: m/min; m/h; ft/min; ft/h; yd/min; yd/h; in/min; in/h; mil/h
Length: cm; m; in; ft; yd
Memory: 13 readings (incl. MIN + MAX + last value) for 5 min after last use
Resolution: Length: 0.00508 m/impulse
revolution: 60 impulse/revolution
Display: 5 digit, LED 12 mm
Display update: 1 s
Over range indicator: Display is flashing
Auto power off: After 10 s of non-use
Power supply: 2 x 1.5 V type AA, approx. 40 h continuous use
Low battery indicator: ”B” flashes in the Display
Temperature range: 5 – 45 °C
Air humidity: 85 % RH, max.
Housing material: Die-cast aluminium
Tripod fixing: 1/4-20 UNC thread
Dimensions: 183 x 60 x 46 mm (LxWxH)
Weight, net (gross): Approx. 350 g (approx. 800 g)

Specifications subject to change without notice.

Delivery Includes
Geschwindigkeits- und Längenmesser DT-107A-12CSpeed and length meter DT-107A-12C with batteries, carrying case, 2 rubber tips, 1 funnel, 1 measuring wheel (12 inch circumference), 1 extension 75 mm, Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in German and English

Feel free to discuss your purchasing plan with us

Contact Our Sales Team

Yarn Speed and Length Meter, Tachometer

Speed and Length Meter DT-105A-12C

Yarn Speed and Length Meter YS-105

Combined hand-held tachometer:
– speed and length meter for filament and similar materials
– hand-held tachometer for contact measurement

Tachometer with LCD display and many electable measuring units

High quality hand-held tachometer with LCD display for professional use at e. g. circular knitting machines, winders, motor shafts etc.

  • Design: contact measurement
  • Application: revolution, speed and length
  • Measuring range:
    0.1 – 25000 rpm
  • Display: LCD, electricity saving.
Speed and Length Meter DT-107A-12C

Yarn Speed and Length Meter YS-20

Combined hand-held tachometer:
– speed and length meter for filament and similar materials
– hand-held tachometer for contact and non-contact measurement e.g engine shafts

Tachometer with LCD display and 7 selectable measuring units

The most used yarn-speedmeter for circular knitting machines

4 in 1

CE mark

  • Application: Speed and length meter as well as tachometer (rpm, length)
  • Housing: Compact, handy, plastic with rubber protective sheet
  • Display: LCD.
Speed and Length Meter DT-107A-12C

Wire Speed and Length Meter YS-TR

Combined hand-held tachometer:
– speed and length meter for welding wires and similar materials
– hand-held tachometer for contact and non-contact measurement e.g engine shafts

Tachometer with LCD display and 7 selectable measuring units

Suitable for Welding wire diameter 0.3 to 3 mm

4 in 1

CE mark

  • Application: Speed and length meter as well as tachometer (rpm, length)
  • Housing: Compact, handy, plastic with rubber protective sheet
  • Display: LCD.

Features

Special Features

  • Hand-held tachometer to determine yarn- or wire speed as well as length;
    the measurement is carried out, as long as the measuring key is pressed.
  • The tachometer can be used also for contact measuring of revolutions, line speeds and length
  • Measuring range (yarn and wire):
    • speed 0.1 – 5000 m/min
    • length 0.1 – 9999 m
  • Max. material diameter:
    • wire 0.3 mm
    • yarn 1.5 mm
  • Unique wrapper roller guides for easy yarn catching
  • Contact more than 180°
  • 6 inch U-grooved measuring wheel
  • Max., Min and last four readings can be stored with the yarn speed and length meter YS-105
  • 16 adjustable measuring units: rpm, rev, m/min, m/h, ft/min, ft/h, yd/min, yd/h, in/min, in/h, mil/h, cm, m, in, ft, yd

Standard Features

  • Smooth running measuring wheel
  • Tachometer with large, electricity saving LCD display
  • Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread)
  • Rugged aluminium housing

Special Features

  • The yarn speed and length meter YS-20 combines the function of four separate instruments in one:
    • Speed and length meter
    • contact measuring of revolutions
    • contact measuring of velocity of rotation
    • non-contact measuring of revolutions
  • 2 Slide-in measuring adapters for yarn speed and length meter YS-20 make it simple to convert from contact to non-contact or to speed and length measurement
  • User-selected units
    • Linear
    • Speed: meters/min, feet/min, inches/min
    • Length: meters, feet, inches
    • Revolutions: rpm
  • The measurement is carried out, as long as the measuring key is pressed
  • Built-in memory for minimum, maximum and last values
  • Tachometer with big, easy to ready LCD display
  • Electricity saving electronic assures a long battery durability

Standard Features

  • Easy to use
  • Rugged plastic housing with rubber sheathing for firm and safe handling
  • Easy to read display

Special Features

  • The yarn speed and length meter YS-TR combines the function of four separate instruments in one:
    • Speed and length meter
    • contact measuring of revolutions
    • contact measuring of velocity of rotation
    • non-contact measuring of revolutions
  • 2 Slide-in measuring adapters for yarn speed and length meter YS-TR make it simple to convert from contact to non-contact or to speed and length measurement
  • User-selected units
    • Linear
    • Speed: meters/min, feet/min, inches/min
    • Length: meters, feet, inches
    • Revolutions: rpm
  • The measurement is carried out, as long as the measuring key is pressed
  • Tachometer with big, easy to ready LCD display
  • Electricity saving electronic assures a long battery durability.

Standard Features

  • Easy to use
  • Wire speed and length meter YS-TR with rugged plastic housing with rubber sheathing for firm and safe handling

  • Easy to read display

Specification

Measuring range:
(floating decimal point)		 Revolution: 0.1 – 25000 rpm; 6 – 9999.9 rph
Speed: z. B. 0.02 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min;
0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min; 1.0 – 9999 yd/h; 0.0006 – 142.5 mil/h
Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft; 0.005 – 9999.9 yd
Accuracy: Revolution: 0 – 999.9 rpm (±0.1 rpm) ±1 digit
1000 – 9999.9 rpm (±1 rpm) ±1 digit
10000 – 25000 rpm (±0.01% of reading) ±1 digit
Speed and length: ±0.4 % of reading, ±1 digit
Measuring units: Revolution: rpm, rph;
Total revolutions (counter): rev
Speed: m/min; m/h; ft/min; ft/h; yd/min;yd/h; in/min; in/h; mil/h
Length: cm; m; in; ft; yd
Memory: MIN + MAX + last 4 values
Resolution: Length: 0.00254 m/impulse (with 6 inch measuring wheel)
Revolution: 60 impulse/revolution
Display: 5 digit, LCD 12 mm
Display update: 1 s
Over range indicator: Display is flashing
Auto power off: After 5 min of non-use
Power supply: 2 x 1.5 V Type AA; approx. 65 h continuous use
Low battery indicator: “LO BAT” flashes at the display
Temperature range: 5 – 45 °C
Air humidity: 85 % RH, max.
Housing material: Die-cast aluminium
Tripod fixing: 1/4-20 UNC thread
Dimensions: Approx. 183 x 80 x 46 mm (LxWxH)
Weight, net (gross): Approx. 600 g (approx. 1000 g)

Specifications subject to change without notice

Delivery Includes

Lieferumfang Fadengeschwindigkeits- und Längenmesser YS-105Yarn speed and length meter YS-105 with batteries, carrying case, 1 measuring wheel U-grooved, 2 rubber tips, 1 funnel, 1 rubber measuring wheel (6 inch circumference), 1 extension 75 mm, Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in German and English

Measuring ranges: Yarn speed measurement
0.10 … 1999 m/min
0.40 … 6550 ft/min
4.00 … 78700 in/min
0.10 … 33.30 m/sec
0.10 … 109 ft/sec
Yarn length measurement
0.00 … 99999 m
0.00 … 99999 ft
0.00 … 99999 in
Revolution measurement
Non-contact measurement: 1.00 … 99999 rpm
Contact measurement: 0.10 … 19999 rpm
Accuracy: ±0.2 % of displayed value ±1digit (not length measurement)
Measuring units: Speed: m/min, ft/min, in/min, m/sec, ft/sec
Length: m, ft, in
Revolutions: rpm
Display: 5 digit LCD, 10 mm high – floating decimal point
Measuring system: Speed/Length: Slide-on measuring head with 30 mm diameter measuring wheel and wrapper roller
Non-Contact Tachometer: Visible LED light beam
Contact Tachometer: Slide-on measuring head with cone tip and surface speed wheel (10 cm circumference)
Yarn/wire diameter: Yarn: max. 0.5 mm
Wire: max 0.3 mm
Memory: Min, Max, last reading, all retained in memory for the life of batteries
Sensing distance: Max. 600 mm
Display update time: 1 s
Auto Power Off: After 30 s of non-use
Temperature range: 5 – 45 °C
Air humidity: 85 % RH, max.
Power supply: Batteries 2 x 1.5 V type AA (approx. 20 h continuous use)
Housing material: ABS plastic
Dimensions: 145 x 60 x 30 mm (LxWxH)
Weight, net (gross): Approx. 150 g (700 g)

Specifications subject to change without notice.

Delivery Includes

Fadengeschwindigkeits- und Längenmesser YS-20Yarn speed and length meter YS-20 with carrying case and standard accessories: 2 batteries, 1 yarn measuring adapter with rubber measuring wheel, 1 adapter for contact measuring, 1 rubber tip for contact measuring, 1 funnel, 2 rubber measuring wheels (10 cm, 6 inch circumference), 1 extension, 10 strips with reflective tapes, operating instruction in German and English

Measuring ranges: wire speed measurement
0.10 … 1999 m/min
0.40 … 6550 ft/min
4.00 … 78700 in/min
0.10 … 33.30 m/sec
0.10 … 109 ft/sec
wire length measurement
0.00 … 99999 m
0.00 … 99999 ft
0.00 … 99999 in
Revolution measurement
Non-contact measurement: 1.00 … 99999 rpm
Contact measurement: 0.10 … 19999 rpm
Accuracy: ±0.2 % of displayed value ±1digit
Measuring units: Speed: m/min, ft/min, in/min, m/sec, ft/sec
Length: m, ft, in
Revolutions: rpm
Display: 5 digit LCD, 10 mm high – floating decimal point
Measuring system: Speed/Length: Slide-on measuring head for welding wires
Non-Contact Tachometer: Visible LED light beam
Contact Tachometer: Slide-on measuring head with cone tip and surface speed wheel (10 cm circumference)
Diameter: 0.8 – 3 mm
Memory: MIN, MAX, last reading, all retained in memory for the life of batteries
Sensing distance: Max. 600 mm
Display update time: 1 s
Auto Power Off: After 30 s of non-use
Temperature range: 5 – 45 °C
Air humidity: 85 % RH, max.
Power supply: Batteries 2 x 1.5 V type AA (approx. 20 h continuous use)
Housing material: ABS plastic
Dimensions: 145 x 60 x 30 mm (LxWxH)
Weight, net (gross): Approx. 150 g (700 g)

Specifications subject to change without notice.

Scope of delivery wire speed and length meter YS-TRWire speed and length meter YS-TR with carrying case and standard accessories: 2 batteries, 1 yarn measuring adapter with rubber measuring wheel, 1 adapter for contact measuring, 1 rubber tip for contact measuring, 1 funnel, 2 rubber measuring wheels (10 cm, 6 inch circumference), 1 extension, 1 strip of reflective tapes, operating instruction in German and English

Yarn Length Meter for Knitting Industries

Yarn Length Meter LMC-V, LMI-V

Yarn Length Meter LMC-V, LMI-V

Measuring range 1 – 999999 cm or inch

Electronic length meter to measure the yarn consumption of a single yarn feeding system for one or more machine cycles of a circular knitting machine.

Measuring time is determined with start/stop signal of the magnetic sensor or manual by operator.

  • Application: Yarn consumption and length measurement
  • Design: with magnetic switch for external start-stop signal
  • Measuring range: 1 – 999999 cm or inch
Features

Special Features

  • Yarn length meter LMC-V for measurements in cm and LMI-V for measurements in inch
  • Sensor controlled unit with a sensor (mounted on machine frame) and magnet (mounted on rotating part) for automatic start/stop signal
  • Precision, ball-bearing mounted wheel is recessed into an adjustable slot on the rear side
  • Material slip is eliminated by maximum enlacement of material (approx. 120°) with rubber coated wheel.

 

Yarn length meter LMC-V

It is stationary mounted between filament break monitors and filament guides using the supplied magnetic base.

Standard Features

  • Easy to operate
  • Includes magnetic base for quick installation on the machine; it is stationary mounted on the zylinder ring between filament break monitors and filament guides
  • Battery operated length meter
Available Models
Model Measuring Range
 Operation Mode
LMC-V 1 – 999999 cm with sensor/manual
LMI-V 1 – 999999 in with sensor/manual
alternative
LMC 1 – 999999 cm manual
LMI 1 – 999999 in manual
Specification
Model LMC-V Model LMI-V
Measuring range: 1 – 999999 cm 1 – 999999 in
Resolution: 1 cm 1 in
Accuracy: ±0.1 % of displayed value ±1 digit ±0.1 % of displayed value ±1 digit
Measuring principle: Pulse counting Pulse counting
Preselect switch: 1 – 99 machine revolutions 1 – 99 machine revolutions
Display: LCD, 5 mm high LCD, 5 mm high
Auto power off: After 2 min of non-use After 2 min of non-use
Temperature range: 10 – 45 °C 10 – 45 °C
Air humidity: 85 % RH, max. 85 % RH, max.
Power supply: 2 x 1.5 V type AAA (approx. 30 h continuous use) 2 x 1.5 V type AAA (approx. 30 h continuous use)
Housing material: Aluminium Aluminium
Dimensions: Instrument: 160 x 55 x 51 mm (LxWxH)
magnetic base: high 175 mm, Ø 48 mm		 Instrument: 160 x 55 x 51 mm (LxWxH)
magnetic base: high 175 mm, Ø 48 mm
Weight: Instrument: approx. 300 g;
magnetic base: approx. 230 g
complete (gross): approx. 800 g		 Instrument: approx. 300 g;
magnetic base: approx. 230 g
complete (gross): approx. 800 g
Delivery Includes
Yarn length meter LMC-V or LMI-V with transport packaging, 2 batteries, 1 magnetic base, 1 sensor with 1 m cable, 1 magnet, Certificate of Compliance of the order 2.1, operating instruction in German or English
Yarn Length Meter LMC and LMI

Yarn Length Meter LMC and LMI

Measuring range 1 – 999999 cm or inch

Electronic length meter to measure the yarn consumption of a single yarn feeding system for one or more machine cycles of a circular knitting machine

Measuring time is determined by operator using start/stop button.

  • Application: Yarn consumption and length measurement
  • Design: manual measurement at operators inducement
  • Measuring range: 1 – 999999 cm or inch.
Features

Special Features

  • Yarn length meter LMC for measuring cm and LMI for measuring in inch
  • Basic unit with Start/Stop button for manual, easy and quick measurements
  • Precision, ball-bearing mounted wheel is recessed into an adjustable slot on the rear side
  • Material slip is eliminated by maximum enlacement of material (approx. 120°) with rubber coated wheel

 

Yarn length meter LMC-V

It is stationary mounted between filament break monitors and filament guides using the supplied magnetic base.

Standard Features

  • Easy to operate
  • Magnetic base for quick installation; it is stationary mounted on the cylinder ring between filament break monitors and the filament guides.
  • Battery operated length meter.
Available Models

Available Models

Model Measuring Range
 Operation Mode
LMC 1 – 999999 cm manual
LMI 1 – 999999 in manual
alternativee
LMC-V 1 – 999999 cm with sensor/manual
LMI-V 1 – 999999 in with sensor/manual
    Specification
    Model LMC Model LMI
    Measuring range: 1 – 999999 cm 1 – 999999 in
    Resolution: 1 cm 1 in
    Accuracy: ±0.1 % of displayed value ±1 digit ±0.1 % of displayed value ±1 digit
    Measuring principle: Pulse counting Pulse counting
    Display: LCD, 5 mm high LCD, 5 mm high
    Auto power off: After 2 min of non-use After 2 min of non-use
    Temperature range: 10 – 45 °C 10 – 45 °C
    Air humidity: 85 % RH, max. 85 % RH, max.
    Power supply: 2 x 1.5 V Type AAA
    (approx. 30 h continuous use)    		 2 x 1.5 V Type AAA
    (approx. 30 h continuous use)
    Housing material: Aluminium Aluminium
    Dimensions: Instrument: 160 x 55 x 51 mm (LxWxH)
    magnetic base: high 175 mm, Ø 48 mm    		 Instrument: 160 x 55 x 51 mm (LxWxH)
    magnetic base: high 175 mm, Ø 48 mm
    Weight: Instrument: approx. 300 g;
    magnetic base: approx. 230 g
    complete (gross): approx. 800 g    		 Instrument: approx. 300 g;
    magnetic base: approx. 230 g
    complete (gross): approx. 1200 g

    Specifications subject to change without notice.

    Delivery Includes
    Lieferumfang Fadenlängenmesser LMCYarn length meter LMC or LMI with transport packaging, 2 batteries, 1 magnetic base, Certificate of Compliance of the order 2.1, operating instruction in German or English.

    Feel free to discuss your purchasing plan with us

    Contact Our Sales Team

    Pin It on Pinterest

    Share This